| | |  | | MSDS |
| | | | Surface Preparation Guide |
| |  | | Project Tutorials |
| | | | Color Guide |
| | | | FAQ |
| | | | Coverage Chart |
| | | | Glossary |
| | | | Videos |
|
|
|
| | | | | | | | | | | | STEP 1
Remove any debris or rust with sandpaper and/or wire brush. | | | | STEP 2
Clean surface with soap and water.
| | | | STEP 3
It is recommended that you apply one coat of Stops Rust Primer to the light. As always, follow manufacturer’s recommendations on preparation, application, drying times and clean up.
| | | | STEP 4
Apply one coat of Stops Rust Gray Hammered Spray, making sure that corners, edges and heavily pitted areas are adequately covered. Apply a second coat, if necessary, within 2 hours or after 48 hours. | |
|
|  | | Print Version |
| | | | | | | | |
|
| |
