|
| Remove old cabinet hardware from cabinets. | |
|
| Remove any debris or rust with sandpaper and/or wire brush. | |
|
| Clean surface with soap and water. | |
|
| Poke holes into the cardboard | |
|
| Place hardware onto the cardboard | |
|
| Apply one coat of Rust-Oleum Ultra Cover 2x to the hardware. As always, follow manufacturer’s recommendations on preparation, application, drying times and clean up. | |
|
| Apply one coat of Rust-Oleum Ultra Cover 2x Spray. Apply 2 or more light coats a few minutes apart. Apply one light coat followed by one heavy coat for best appearance. | |
|
| Allow hardware to fully dry before you place it back on your cabinetry. | |
