|Surface Preparation Guide|
|• Remove all dirt and debris from the area to be coated. Wash area with a detergent and water solution, rinse with fresh water, and allow the surface to dry thoroughly.|
• Remove any loose paint or previous coatings with a wire brush or sandpaper. Lightly sand glossy surfaces. Wipe the sanded surface clean when finished.
• Hold can 8-18” from the surface and spray in short even strokes. It is recommended to apply a light first coat. Apply a second heavier coat to ensure proper coverage.
• Dries to the touch in 2 hours
|Old Sheets or Drop Cloth|
|1 Can of Rust-Oleum LeakSeal|