High Performance

9100 System DTM Epoxy Mastic


HP 1 Gal 9100 System DTM Epoxy Mastic Base
Click to Enlarge

Aluminum
9115402

Select a Color (28)

  • Colors :

  • Tint Bases :

  • Activators (340 VOC) :

  • Activators (250 VOC) :

About 9100 System DTM Epoxy Mastic

This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of competitive epoxy. Multiple activator options for unique applications.

  • Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
  • Superior long-term resistance to solvents, chemicals, abrasion and impact
  • Convenient 1:1 mixing ratio – no measuring required
  • Two-year rust-proof guarantee—maximum corrosion protection
  • Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; <340 VOCs

 

ACTIVATORS:

Standard Activator

  • For air and surface temps of 50-100°F (10-38°C)

Immersion Activator

  • For fresh or salt water immersion of steel or concrete where water temps do not exceed 125°F (52°C)
  • Great for use in floor-coating applications
  • Produces slightly lower gloss than standard activator
  • Not for use in potable water tanks

Low-Temperature Activator

  • For air and surface temps of 40-60°F (5-15°C)

Fast-Cure Activator

  • Faster cure to minimize downtime
  • Recoat in 4 hours at 70°F (21°C) and 50% RH
  • For air and surface temps of 50-100°F (10-38°C)
  • Produces slightly lower gloss than standard activator

For Best Results 

  • This is a two-component system—order base color and activator separately.

Available Sizes

  • Gallon
  • Five Gallon

About 9100 System DTM Epoxy Mastic

This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of competitive epoxy. Multiple activator options for unique applications.

  • Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
  • Superior long-term resistance to solvents, chemicals, abrasion and impact
  • Convenient 1:1 mixing ratio – no measuring required
  • Two-year rust-proof guarantee—maximum corrosion protection
  • Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; <340 VOCs

 

ACTIVATORS:

Standard Activator

  • For air and surface temps of 50-100°F (10-38°C)

Immersion Activator

  • For fresh or salt water immersion of steel or concrete where water temps do not exceed 125°F (52°C)
  • Great for use in floor-coating applications
  • Produces slightly lower gloss than standard activator
  • Not for use in potable water tanks

Low-Temperature Activator

  • For air and surface temps of 40-60°F (5-15°C)

Fast-Cure Activator

  • Faster cure to minimize downtime
  • Recoat in 4 hours at 70°F (21°C) and 50% RH
  • For air and surface temps of 50-100°F (10-38°C)
  • Produces slightly lower gloss than standard activator

For Best Results 

  • This is a two-component system—order base color and activator separately.

Available Sizes

  • Gallon
  • Five Gallon



Note: To view the MSDS or TDS you need to have the Acrobat Reader Software.
SKU
Color
UPC
Material Safety Data Sheets (MSDS)