CABINET TRANSFORMATIONS FAQS

Cabinet Transformations Faqs



  • 16.

    I've Applied the Decorative Glaze, But Do Not Like the Way It Looks - What Can I Do?

    The Decorative Glaze stays wet 3-5 minutes. While wet, simply use Decorative Glazing Cloth to remove glaze from surface. If the Decorative Glaze has dried, use a clean, damp cloth to remove glaze from surface. Note: If applying over open grain cabinetry, such as Oak, you may not be able to remove all Decorative Glaze from the surface. If this is the case, you will need to apply another coat of Bond Coat followed by the Protective Top Coat.
  • 17.

    Do I Have to Use the Decorative Glaze?

    Using the Decorative Glaze is optional and does not add additional performance benefits to the system. If you do not wish to use the Decorative Glaze, simply skip "STEP #3" in the application process.
  • 18.

    Can I spray or roll on Cabinet Transformations?

    It is not recommended to spray or roll on the Bond Coat of the Cabinet Transformations™ if you plan on applying the Decorative Glaze. As the glaze is wiped off with the Decorative Glazing Cloth, some glaze naturally remains in the vertical grooves made by the brush marks from the Bond Coat. Spraying or rolling on the Bond Coat eliminates the possibility of achieving this effect.
  • 19.

    Can I Spray Cabinet Transformations If I Do Not Intend to Use the Decorative Glaze?

    You may spray Cabinet Transformations® only when you do not intend to use Decorative Glaze in the system. To spray the Bond Coat, reduce with up to 30% water and use a HVLP sprayer at 35psi. To spray the Protective Top Coat, reduce with up to 10% water and use a HVLP sprayer at 35psi. Ideal spray temperature and humidity conditions are 78ºF with 35% humidity.
  • 20.

    How Do Humidity and Temperature Affect the Coating Application Process?

    Higher humidity will cause the coating to dry more slowly while lower humidity will cause the coating to dry more quickly. Apply when air (ambient) temperature is 50-90ºF (10-32ºC) and relative humidity is below 60%.