EPOXYSHIELD GARAGE FLOOR COATING FAQS

EPOXYSHIELD Garage Floor Coating Faqs



  • 1.

    How sound does my concrete need to be to coat?

    Floor should be in good condition and should not contain any loose, chipped (spalled), or cracked concrete. For best results, remove all loose material and dust and repair damaged areas before you coat. If applying product to newly poured concrete, allow surface to cure for at least 28 days prior to coating.
  • 2.

    What kind of test can I perform to confirm this?

    A visual assessment of the condition of the floor, as well as checking for moisture and presence of a sealer (see tests for these conditions below), are necessary tests to perform to determine if a floor is in good enough condition to coat.
  • 3.

    Can I coat damaged/flawed/marred concrete?

    We do not recommend applying this product on damaged, flawed, or marred concrete. Concrete must be sound, as noted above. If concrete is dirty or greasy, use a scrub brush and degreaser to clean the floor prior to coating.
  • 4.

    Will this product fill voids in the concrete?

    No, this product will not fill voids and cracks in the surface. Any cracks or voids should be repaired prior to coating.
  • 5.

    Will this product mask imperfections?

    Floor should be in good condition and should not contain any loose, chipped (spalled), or cracked concrete. For best results, remove all loose material and dust and repair damaged areas before you coat.