Customer Project

Vintage Enamel Top Table and Chairs

>

Browse Projects

  • spice cabinet
    Spice Cabinet
vintage enamel top table and chairsAfter
vintage enamel top table and chairs After
  1. The table top was rusty and dirty. I took it outside and put a paste of vinger and baking soda and a dash of cream of tarter on it and let it sit
  2. The legs were off so I just used Rust-Oleum® Painter's® Touch Ultra Cover 2X Gloss Spray in Gloss Black. It gives them a Great sheen. Again done OUTSIDE
  3. On the chairs I used one coat of Rust-Oluem® Painter's® Touch Ultra Cover 2X Primer Spray in White. let dry. Then applied a coat of white Rust-Oleum® Painter's® Touch Ultra Cover 2X Gloss Spray in White.
  4. When the chairs were dried. I painted just the back of chairs with Rust-Oleum® Painter's® Touch Ultra Cover 2X Semi-Gloss Spray in Black.
  5. By now the paste on the table had been sitting for a good hour. Take a spray bottle of water and brush. I use a nail brush with a handle on it. and start scrubbing off the paste. It REALLY cleans the rust and dirt off without damaging the enamel.
  6. Attach the legs
  7. Sit back and enjoy your new table