FAQS for Consumers

From general questions about painting and staining, to specific questions about Rust-Oleum products, let us help you answer common questions about surfaces and coatings.

• 

  Garage FAQs

  1. When should I apply a garage floor coating?
  2. How do I clean my concrete before applying a garage floor coating?
  3. Can I coat my concrete floor if it’s still wet after cleaning?
  4. What if there are cracks in my concrete?
  5. How do I know if my concrete is in good enough condition to coat?
• 

  Rust-Oleum HOME FAQs

  1. Do I need to apply a primer before using Rust-Oleum HOME?
  2. Can Rust-Oleum HOME be used in garages?
  3. On what surfaces can I use Rust-Oleum HOME?
  4. If I have a tile floor that has grout, what do I do with the grout? Will the paint adhere?
  5. Do I have to use both the Base Coat and the Top Coat?
• 

  Factor 4® FAQs

  1. How does Factor 4 Synthetic Wax System compare to a conventional car wax?
  2. Conventional car wax durability is typically 3-6 months. Does the Factor 4 Synthetic Wax System really last up to 3 years?
  3. Is Factor 4 Synthetic Wax System safe for all finishes?
  4. My car has a clear coat finish, isn’t that enough protection?
  5. How do I use Factor 4?
• 

  Outdoor Fabric Paint

  1. Do I need to prep my surface before I begin?
  2. My pillows have pilling or fibers that are standing up. Can I paint over them?
  3. Can I spray my cushions or pillows on my lawn?
  4. When using the Rust-Oleum Outdoor Fabric Paint, it is foaming on the surface. Is something wrong?
  5. Can the Rust-Oleum Outdoor Fabric Paint be used on interior fabrics?
• 

  Primer FAQs

  1. If my paint can says "paint and primer in one," do I still need a primer?
  2. What are the different types of primers?
  3. What do I need to do before painting or priming?
  4. What is the best primer for my project?
  5. What's the difference between primer and paint?
• 

  RockSolid 2X Solid Stain FAQs

  1. What makes RockSolid 2X Solid Stain different from other solid stains?
  2. What other features does RockSolid 2X Solid Stain have?
  3. Does RockSolid 2X Solid Stain fill voids in the wood and concrete?
  4. Does RockSolid 2X Solid stain have a smooth texture?
  5. What surfaces can I apply RockSolid 2X Solid Stain to?
• 

  Miracle Sealants FAQs

  1. What do the 511 products do?
  2. How long will 511 Impregnator & 511 Porous Plus last?
  3. Will the 511 products build up, crack, peel, or discolor?
  4. How do I apply 511 products?
  5. How toxic are the 511 products?
• 

  RockSolid 6X Deck Coat FAQs

  1. What makes RockSolid 6X Deck Coat different from other solid stains?
  2. What other features does RockSolid 6X Deck Coat have?
  3. Does RockSolid 6X Deck Coat fill voids in the wood and concrete?
  4. Does RockSolid 6X Deck Coat have a smooth texture?
  5. What surfaces can I apply RockSolid 6X Deck Coat to?
• 

  RockSolid 20X Resurfacer FAQs

  1. What makes RockSolid 20X Deck Resurfacer different from other solid stains?
  2. What other features does RockSolid 20X Deck Resurfacer have?
  3. Does RockSolid 20X Deck Resurfacer fill voids in the wood and concrete?
  4. Does RockSolid 20X Deck Resurfacer have a smooth texture?
  5. What surfaces can I apply RockSolid 20X Deck Resurfacer to?
• 

  Peel Coat Custom Color & Effects System

  1. What surfaces are best for the Peel Coat Custom Color & Effects System?
  2. How does Peel Coat Custom Color & Effects System affect my project’s original paint or surface?
  3. What prep work goes into using the Peel Coat Custom Color & Effects System?
  4. What types of tools do I need to complete the job?
  5. When I spray Peel Coat Custom Color & Effects System with my HVLP spray gun, which size nozzle should I use?
• 

  Watco Finishing FAQs

  1. How do I choose the right finish?
• 

  Glitter Interior Wall Paint FAQs

  1. What surfaces can I use Rust-Oleum Glitter Wall Paint on?
  2. Does glitter wall paint leave a smooth finish?
  3. Can I use Rust-Oleum Glitter Wall Paint outside?
  4. Do I need to prime before using glitter wall paint?
  5. After priming, am I ready to paint?
• 

  Seal-Krete Epoxy Seal FAQs

  1. What is Epoxy-Seal?
  2. Is Epoxy-Seal a two-component system?
  3. What are the color choices for Epoxy-Seal?
  4. Will Epoxy-Seal yellow?
  5. Where can Epoxy-Seal be applied?
• 

  Seal-Krete Oil Stain Remover

  1. Will Oil Stain Remover remove oil stains from sealed concrete surfaces?
  2. I applied another degreaser to an oil stain that had been on my garage floor for a long time. It did not remove the stain. Would you recommend Oil Stain Remover to remove old oil stains from concrete surfaces?
  3. I purchased Oil Stain Remover to treat the oil stains on my garage floor. Do you think it would also remove paint overspray from the floor?
  4. How long does it take Oil Stain Remover to turn to powder?
• 

  Seal-Krete® Original FAQs

  1. Can Seal-Krete Original All-Purpose Waterproofer be applied below Grade?
  2. Can Seal-Krete Original All-Purpose Waterproofer be used on my concrete floor before installing new carpet?
  3. Can I use Seal-Krete Original All-Purpose Waterproofer on the exterior of my home before repainting? The stucco is chalking and I want to ensure that the paint properly adheres to the stucco.
  4. I have a couple of gallons of Seal-Krete Original All-Purpose Waterproofer left over from painting my home this spring, can I use it to seal my driveway?
  5. I’m the president of the Historic Committee in my community and we’re looking to preserve several of the original brick buildings in the downtown area. Some of the bricks are crumbling due to moisture over the years. Can we use Seal-Krete Original All-Purpose Waterproofer to preserve these important landmarks?
• 

  Specialty High Heat Ultra Aerosol FAQs

  1. What is the Difference between High Heat Ultra and High Heat?
  2. Can I use this inside my fireplace?
  3. What do I do if my can clogs mid project?
• 

  Turbo Spray System FAQs

  1. That can is so big! Is it heavy?
  2. But that is so much paint!
  3. That sounds like a lot of overspray!
  4. What can I paint with Turbo Spray System?
  5. How much surface area does it cover?
• 

  Automotive Undercoating

  1. Why would you use an undercoating?
  2. What are the most popular uses?
  3. What types of surfaces can I paint with undercoatings?
  4. What is the difference between the Undercoating and the Professional Undercoating?
  5. How can it be applied?
• 

  Dry Erase Kit FAQ

  1. How long do I need to wait before using my Dry Erase Board?
  2. What finish does Dry Erase come in?
  3. How do I clean my Dry Erase Project?
  4. Can I use Magnetic and Dry Erase Paint together?
• 

  Truck Bed FAQs

  1. Why would you use a truck bed coating?
  2. What are the most popular uses for truck bed coatings?
  3. What types of surfaces can I paint with Truck Bed coatings?
  4. What is the difference between the Truck Bed Gallon and the Professional Grade Truck Bed Kit?
  5. How can it be applied?
• 

  RockSolid FAQs

  1. What condition does my concrete need to be in to use RockSolid?
  2. How do I know if my concrete is in good enough condition to use RockSolid?
  3. Can I use RockSolid on damaged/flawed/marred concrete?
  4. Will RockSolid fill voids in concrete?
  5. Can I apply RockSolid over expansion Joints?
• 

  Wipe New ReColor FAQs

  1. Do I have to wear gloves when using ReColor by Wipe New®
  2. What if I start applying and have to stop? Can I start again later? Will the results match?
  3. What if it rains after I apply ReColor by Wipe New®
  4. What is the purpose of the applicator brush?
  5. Will ReColor by Wipe New® damage my clothes?
• 

  Wipe New Heavy Duty Headlight Restore FAQs

  1. Do I need to use the sanding discs before applying Wipe New®?
  2. Do I have to wear gloves and eye protection when using Wipe New®?
  3. Is it ok to apply Wipe New® in direct sunlight and/or to hot surfaces? Will being out in the sun speed up the drying process (maybe I’ll need to use a second coat)?
  4. How long does it take for Wipe New® to dry? What happens if the treated surface gets wet before it dries completely (i.e. morning dew, rain)?
  5. Will Wipe New® damage my clothes?
• 

  Wipe New Trim Restore FAQs

  1. How much Wipe New® is needed for my vehicle?
  2. Do I have to wear gloves when using Wipe New®?
  3. What is the purpose of the headlight prep pad?
  4. What is the purpose of the applicator brush?
  5. What are the differences between the microfiber cloths?
• 

  Wipe New Headlight Restore FAQs

  1. Do I have to wear gloves and eye protection when using Wipe New®?
  2. What is the purpose of the Professional Lens Polishing Pad?
  3. Is it ok to apply Wipe New® in direct sunlight and/or to hot surfaces? Will being out in the sun speed up the drying process (maybe I’ll need to use a second coat)?
  4. How long does it take for Wipe New® to dry? What happens if the treated surface gets wet before it dries completely (i.e. morning dew, rain)?
  5. Will Wipe New® damage my clothes?
• 

  Chalked Paint FAQs

  1. What substrates does Chalked paint apply to?
  2. Is additional prep needed for specific substrates?
  3. Do I need to prime before I start my Chalked paint project?
  4. Do I need to sand before starting my Chalked paint project?
  5. Is Chalked paint environmentally friendly?
• 

  Krud Kutter The Must for Rust FAQs

  1. What is rust or oxidation?
  2. Why does rust contain air?
  3. What is The Must for Rust specifically intended for?
  4. What will The Must for Rust remove?
  5. How does The Must for Rust remove rust?
• 

  Peel Coat FAQs

  1. Why would you use a removable coating?
  2. Where can Peel Coat be used?
  3. What are the most popular uses for Peel Coat?
  4. What type of surfaces can I paint with Peel Coat?
  5. Can Peel Coat be used as a protective coating against road salt in winter?
• 

  Rocksolid Wood Coating FAQs

  1. How do I know my surface is ready for a coating application?
  2. How do I properly prepare my deck?
  3. How do I pre-condition my wood surface prior to application?
  4. How else can I properly prepare my deck?
  5. How long after the application process should I stay off my deck?
• 

  General Painting Faqs

  1. Aren’t all paints basically the same?
  2. Which product has the best resistance to gasoline?
  3. Should certain brushes be used with certain paints?
  4. Can I recycle spray cans?
  5. How should I care for my brush so that it maintains its performance level use after use?
• 

  Wood Care FAQs

  1. Do I have to apply a clear coat after staining?
  2. Do I need a Pre-Stain or Wood Conditioner?
  3. How do I apply polyurethane?
  4. How do I apply stain?
  5. How much sanding is necessary?
• 

  SureGrip FAQs

  1. What properties/performance characteristics do contractors look for in an adhesive?
  2. What is unique about SureGrip 122 Clear Strippable adhesive vs. Roman’s 838 and 870?
  3. How much more wallcovering can be installed with SureGrip’s better spread rate on clear and clay adhesives?
  4. How easily should wallcovering pull through a paste machine?
  5. Does water need to be added to paste for use in a paste machine?
• 

  Shield H2O™ Boot & Shoe FAQs

  1. What types of shoes can Rust-Oleum Shield H2O™ Boot & Shoe can be used on?
  2. Does Rust-Oleum Shield H2O™ Boot & Shoe dry clear?
  3. How do you apply Rust-Oleum Shield H2O™ Boot & Shoe?
  4. How does Rust-Oleum Shield H2O™ Boot & Shoe Work?
  5. What are the recommended uses for Rust-Oleum Shield H2O™ Boot & Shoe?
• 

  Cabinet Transformations Faqs

  1. Is Cabinet Transformations Safe To Use?
  2. Does Cabinet Transformations™ Work On Laminate, Melamine, Or Metal Cabinetry?
  3. Can I Use Cabinet Transformations™ On Surfaces Other Than Kitchen Cabinetry?
  4. Do I Have To Strip Or Sand My Cabinets As Part Of The Preparation?
  5. Prior to Using Cabinet Transformations®, How Do I Repair Cracks or Holes In My Original Cabinetry?
• 

  Countertop Transformations Faqs

  1. Can I Do To Keep The Adhesive Base Coat Wet Longer?
  2. Can I Use Rust-Oleum Countertop Transformations® Over an Existing Rust-Oleum Countertop Transformations® Coating?
  3. How Can I Avoid Any Potenital Appearance Probems?
  4. How Does Humidity and Temperature Affect the Coating Application Process?
  5. How Do I Dispose of Unused Product and Soiled Rags Or Brushes?
• 

  Glow in the Dark Faqs

  1. Can Glow in the Dark be sprayed on a base color other than white?
  2. How long does the painted object have to charge for maximum glow?
  3. Should the painted object be charged under natural or artificial light?
  4. Can the paint be used outdoors?
  5. Will the paint be as bright as an LED light?
• 

  Glow in the Dark MAX Faqs

  1. Can Glow in the Dark MAX be sprayed on a base color other than white?
  2. Can the paint be used outdoors?
  3. Does the painted object need to be dry before it can be charged by light?
  4. How long does the painted object have to charge for maximum glow?
  5. Should the painted object be charged under natural or artificial light?
• 

  LeakSeal® Sprays Faqs

  1. Is LeakSeal® chemical resistant? Will it stop an oil leak?
  2. What is the amount of PSI LeakSeal® can withstand?
  3. What type of caulk can LeakSeal® be applied over?
  4. Can LeakSeal® be applied to ABS Plastic or Synthetic Rubber?
  5. Is the LeakSeal® safe to use in food prep areas?
• 

  LeakSeal® Tape Faqs

  1. What is LeakSeal® Tape?
  2. What are the primary product claims for LeakSeal® Tape?
  3. Where can LeakSeal® Tape be used?
  4. Can LeakSeal® Tape be applied in wet applications?
  5. What is the necessary surface preparation needed before application?
• 

  EPOXYSHIELD Garage Floor Coating Faqs

  1. How sound does my concrete need to be to coat?
  2. What kind of test can I perform to confirm this?
  3. Can I coat damaged/flawed/marred concrete?
  4. Will this product fill voids in the concrete?
  5. Will this product mask imperfections?