Restore 10X Advanced Resurfacer FAQs

Restore 10X Advanced Resurfacer FAQs



  • 1.

    Is the new Restore 10X Advanced Resurfacer replacing the first generation of Restore 10X?

    Yes, the new Restore 10X Advanced Resurfacer will replace the first generation Restore 10X product in stores.  With superior features and benefits, Restore 10X Advanced Resurfacer takes the deck coating category to the next level.

  • 2.

    What enhancements have been made to the Restore 10X Advanced Resurfacer?

    Restore 10X Advanced Resurfacer has superior weather-resistance, ultimate water repellency, and superior coverage with a 60% increase (up to 40 square feet with two coats versus 25 square feet) compared to Restore 10X. Restore 10X Advanced Resurfacer also fills in cracks up to ¼” and is an algae and mildew resistant coating. Furniture can be returned to the surface in 48 hours with Restore 10X Advanced Resurfacer compared with 3-5 days for the Restore 10X.  The Restore 10X Advanced Resurfacer also fully cures in approximately 7 days where as Restore 10X took 3-4 weeks to fully cure. 
  • 3.

    Will Restore 10X Advanced Resurfacer still fill voids in the concrete?

    Yes it will fill cracks up to ¼”.  Larger imperfections should be filled with Restore Crack Filler prior to Restore application.
  • 4.

    Does Rust-Oleum Restore 10X Advanced Resurfacer have the same feel/texture as Rust-Oleum Restore 10X?

    Yes, Restore 10X Advanced Resurfacer has the same feel as Restore 10X. 
  • 5.

    What surfaces can I apply Restore 10X Advanced Resurfacer to?

    Wood:  Restore 10X Advanced Resurfacer should only be applied on horizontal, structurally sound wood and most composite surfaces.  Some composite decking is engineered with moisture repellants or sealers that may prevent proper adhesion.  Be sure to follow specific manufacturer’s recommendation before applying to any composite decking. For vertical surfaces use Restore 2X One Coat Solid Stain, Restore 4X Deck Coat, or Restore Solid Acrylic Stain.

    Concrete:  Restore 10X Advanced Resurfacer should only be applied to horizontal and structurally sound broom swept or porous concrete. 

    NOT FOR USE ON:   Smooth or floated concrete, fiberglass, tile, and metal surfaces.  These surfaces will not allow for proper adhesion. Do not use on driveways, garages, or other areas with vehicular traffic.