RockSolid Home FAQs

RockSolid HOME FAQs



  • 1.

    Do I need to apply a primer before using RockSolid HOME?

    No, simply clean the floor with an abrasive cleaner or degreaser, something like Krud Kutter Cleaner Degreaser, wait for it to dry completely, then apply the RockSolid HOME Base Coat.
  • 2.

    Can RockSolid HOME be used on garage floors or carport floors?

    No. RockSolid HOME is for interior floor use only. Not for vehicular traffic.
  • 3.

    Where can I use RockSolid HOME?

    RockSolid HOME can be used on horizontal surfaces that are bare, stained, sealed or previously coated such as ceramic and porcelain tile, hardwood, concrete, laminate, vinyl and linoleum. It is not for use on exterior spaces or garage floors. Do not use on interior surfaces that are sealed with a superhydrophobic sealer. Do not use inside showers or on countertops. This product is also not food safe and should not be used on kitchen counters.
  • 4.

    Will the paint adhere to grout?

    Yes. RockSolid HOME will adhere directly to grout. If you are using a paint brush or a roller, you can apply the paint right to the grout until it’s fully covered. This will give the whole floor a unified look.
  • 5.

    Do I have to use both the Base Coat and the Top Coat?

    Yes. Both products are required for the Interior Floor Coating System. The Base Coat must be applied first and the Top Coat can be applied 6 hours later.