|
Instructional Video
Please watch this video in its entirety before beginning your project. |
 |
STEP 1
Clean Begin the cabinet preparation by deglossing the cabinets as described in the instructional video included in the Cabinet Transformations Kit. |
 |
STEP 2
Bond Coat As demonstrated in the main instructional video use a 2” angled or straight synthetic paintbrush to apply the Bond Coat to the cabinet doors. For wood cabinet doors, be sure to follow the grain. Start with all four inside corners and sides. Next, paint the center panel with long, smooth vertical strokes. For the top and bottom portions, use horizontal strokes. Once the first coat is completely dry, approximately 2-3 hours, apply a second coat. |
 |
STEP 3
Glaze Next, apply decorative glaze using a foam brush to the center panel of the door. |
 |
STEP 4
Remove Glaze Gently wipe the glaze off the center panel of the door with a rolled up glazing cloth, allowing the glaze to remain heavier in the corners and recesses of the doors. Repeat the process on the top and bottom portions of the cabinet doors by wiping in horizontal direction with the grain. Remove the glaze from the outer sides in vertical motion, with the grain of the wood. Allow your cabinet doors, drawers and frames to dry overnight, a minimum of 8 hours before finishing with the Protective Top Coat. |
 |
FINISHED!
|