WOODLIFE® COPPERCOAT™

Sheen:
Semi-Transparent

Protect and preserve new or unsealed exterior wood with Rust-Oleum® WOODLIFE® CopperCoat™ Green Wood Preservative. This unique formula contains an insecticide and nearly twice the fungicide of standard sealers or stains. It can be used alone, or before painting or staining below-ground, ground-contact, fresh-water contact and above-ground wood.

  • EPA-registered, insecticidal preservative prohibits termite damage, rot and decay.
  • Inhibits surface growth of fungal organisms: mold, mildew and staining fungi.
  • Imparts a transparent green color that naturally fades over time.
  • Top coat with any oil-based primer, paint or stain after 24 hours.
  • For Best Results

    Pre-treatment by dip method before installation is recommended. Also designed for protection of deck or porch floor end cuts.
    If wood is brand new and intended for outdoor installation and exposed to weather conditions for 30 days or less, a “splash test” should be performed to determine if there is any surface barrier present which would repel a new coating. Sprinkle a few drops of water on several areas of the surface to be coated. If the water is absorbed rapidly, the surface is ready to be finished with Woodlife® CopperCoat. If the water beads are not absorbed into the wood, a surface barrier exists and must be removed. Apply or Wolman® Deck & Fence Brightener and then test again. Regardless of the surface’s age or condition, failure to follow proper preparation methods will result in poor adhesion and/or possible coating failure.

    Available Sizes

  • 1 Quart
  • 1 Gallon
  • 5 Gallon
    • Locate a Rust-Oleum Retailer

      Rust-Oleum products are sold at retailers across the country. Use our store locator to find Rust-Oleum products at retailers near you.