Concrete Saver

Hard Surface Primer


Rust-Oleum Concrete Saver Hard Surface Primer Gray
Click to Enlarge

Gray
313973

Select a Color (5)

  • Kits :

Technical Documents

SKU
Color
UPC
Safety Data Sheets (SDS)
note: To view the SDS or TDS you need to have the Acrobat Reader Software.
Technical Support
(877)815-4425

About Hard Surface Primer

Hard Surface Primer is a two component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult to coat, or marginally prepared substrates. Substrates include; hard-troweled concrete, aluminum and various types of tiles. Hard Surface Primer can be top coated with most types of floor coating technologies including acrylic, epoxies and polyurethanes.

  • Alternative to traditional mechanical and chemical surface preparation
  • Excellent primer/basecoat for warehouse line striping, zone marking solid color and decorative floor coatings, including metallic systems
  • Can be top coated after 5 hours and before 7 days without sanding
  • Compatible with most floor coating technologies including acrylic, epoxies and polyurethanes
  • VOC compliant nationwide

For Best Results

  • Power mix the material using a 3” Jiffler Mixer or Hanson Plunge Mixer. Mix at 500-750 rpm for 2-3 minutes, making sure a uniform color is achieved.
  • Do not delay the application. The useable pot life is 90 minutes.

Available Sizes

  • 3.75 Quart Kit

Suggested For Use With

  • Two Component System