Customer Project
Clean Lattice and Fencing
Browse Projects
-
Estimated Time
2 Hours
-
Challenge Level
Intermediate
-
Tools & Supplies:
-
Pressure Washer or Hose (see 2nd set of directions)
-
- Rinse surrounding areas and vegetation with water.
- Wet the section of the fence to be cleaned. (Do 1 section at a time.)
- Put pressure wash siphon tube of the pressure washer directly into bottle of Krud Kutter Deck & Fence or pour product full strength into reservoir of the pressure washer.
- Spray at a low pressure onto the wet surface.
- Let sit for 3 – 5 minutes – DO not allow product to dry on surface. (Will work best if done out of direct sunlight.)
- Heavily soiled or mildewed areas may need to be scrubbed.
- A second application may be needed for heavily soiled areas
- Rinse surrounding vegetation.
- Repeat for all sections of lattice/fencing.
- Rinse surrounding vegetation one more time.
If you don’t have a pressure washer
- Mix 12oz of product with 1 gallon of water in a bucket. (If heavily soiled it may be necessary to make the mixture slightly stronger with Krud Kutter Deck & Fence Pressure Washer Concentrate.)
- Rinse surrounding areas and vegetation with water.
- Wet the section of the fence to be cleaned. (Do 1 section at a time.)
- Clean in sections with a soft bristle brush working from top down.
- Let sit for 3 – 5 minutes – DO not allow product to dry on surface. (Will work best if done out of direct sunlight.)
- Heavily soiled or mildewed areas may need to be scrubbed or a second application may be needed.
- Rinse cleaner off the surface with a hose.
- Repeat for all sections of lattice/fencing.
- Rinse surrounding vegetation one more time.