Rust-Oleum

Cabinet Transformations White Tint Base Kit

Rust-Oleum Cabinet Transformations White Tint Kit is a revolutionary do-it-yourself kitchen cabinet paint coating system that completely changes the dated or worn look of your cabinets for a fraction of the cost of purchasing new ones. Create the look of hand-crafted cabinetry in your kitchen or bathroom without the downtime or mess associated with cabinet replacement. Easy-to-use cabinet paint requires no stripping, sanding or priming. White tint base provides 14 color choices for a custom look.

Perfect for kitchen cabinets, bathroom vanities and furniture
Ideal for use on wood, laminate, metal or melamine surfaces
Each kit covers up to 100 sq. ft.
Provides a smooth soft shine with a rich satin finish in 3 easy steps
Offers superior stain and scratch resistance
Soap and water cleanup
Full use of cabinets and furniture after 24 hours
Includes 4 oz Krud Kutter Cleaner/Degreaser, Bond Coat and Top Coat
Bring your kit to the paint counter to tint to a light color of your choice or leave untinted for white cabinet paint

FOR BEST RESULTS

Properly measure your cabinetry prior to starting the project. If these measurements exceed the coverage on your kit package, you will need to purchase an additional kit.

Thoroughly inspect the cabinet surfaces for heavy grease or dirt. Pay special attention to areas around the stove, microwave and sink. Clean these extra dirty or greasy areas with soapy water and wipe clean prior to cleaning with the included Krud Kutter.

AVAILABLE SIZES

Kit - 100 Square Feet

Rust-Oleum HOME® Floor Deep Tint Base Base Coat

Rust-Oleum HOME^® Base Coat is Step 1 of 2 of this extremely durable interior Floor Coating system. This easy-to-use system can transform the look of any outdated floor without the cost of replacing it. The Base Coat brings a variety of color options you can choose from to refresh your space just by painting your floor. It can be used on tile, wood, laminate, concrete, vinyl, linoleum and more. Apply the Base Coat in your desired color and then apply the required Top Coat in one of two sheens.

Easy 2-step system
Superior adhesion to tough surfaces
Maximum scratch & stain resistance
Walk on in one day
No stripping, sanding or priming
Base coat and top coat are required

FOR BEST RESULTS

Simply clean the floor first with a cleaner degreaser and then apply the Base Coat. Apply the Top Coat 6 hours after application of the Base Coat.

AVAILABLE SIZES

1 Gallon
1 Quart

Truck Bed Coating

Rust-Oleum® Truck Bed Coating is the choice for recoating and restoring worn, unfinished or previously finished metal truck beds. When used with Rust-Oleum Truck Bed Applicator Kit (sold separately), this easy to apply polymer coating not only helps prevent truck bed damage caused by scratches, rust and weather, but it also enhances your vehicle's appearance.

Durable abrasion resistant
Textured finish that forms to the contours of a truck bed
Rust protection from Stops Rust formula
Pick your preferred DIY application from spraying and rolling to brushing
Multi-purpose coating for truck beds, fenders, step areas, trailer floors and more

The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.
• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon

V2100 System High Heat Spray

Add an attractive heat-resistant finish with Rust-Oleum High Performance V2100 System High Heat Coating Spray. This direct-to-metal formula provides the best-possible protection against corrosion and heat and delivers long-lasting durability.

Withstands temperatures up to 1000° F (537° C)
Tough, professional finish—superior resistance to chipping, cracking and peeling
High-output tip covers 50% faster, enamel dries 20% faster than other brands
Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC-compliant nationwide

For Best Results

For large projects, apply using the High Performance Comfort Grip

Protective Enamel Custom Spray 5-in-1

Rust-Oleum® Stops Rust® Protective Enamel with Custom Spray 5-in-1 lets you choose from five spray patterns with a twist of the dial. Use the high output spray for large curved surfaces, standard for a traditional experience, low output for details and corners without drips and runs, and vertical or horizontal fans for flat surfaces. Whether you’re painting wide spaces, tight corners or textured surfaces, Protective Enamel with Custom Spray 5-in-1 gives you ultimate control for superior results. When you're done, turn the dial to the lock position and store the remaining spray paint for your next project.

The advanced Stops Rust formula delivers 30% greater corrosion resistance and enhanced color retention compared to original matching Stops Rust colors with the standard spray paint tip. The durable, protective coating provides ultimate rust prevention for a long-lasting finish and excellent resistance to abrasion, fading, chipping and dulling. Apply this fast-drying paint on indoor and outdoor metal and wood projects for a long-lasting superior results.

Stops Rust® Protective Enamel with Custom Spray 5-in-1 features:

Intuitive spray patterns that give the ultimate control when painting
360° any-angle spray technology
A variety of spray paint colors in gloss, semi-gloss, satin and flat sheens
Fast dry times; dries to the touch in 2-4 hours, recoat within 1 hour or after 48 hours

Bulls Eye 1-2-3® Water-Base Primer

Rust-Oleum® Zinsser® Bulls Eye 1-2-3® Water-Base Primer is a wall primer and sealer that provides outstanding performance indoors and out. It features low odor, great flow and leveling, and a flexible, acrylic formula.

Usable on interior and exterior surfaces

Sticks to all surfaces without sanding

Seals stains, graffiti and tannin bleed

Provides a mold & mildew resistant barrier

Inhibits rust – great for new metal

Dries in 1 hour

Can be applied in temperatures as low as 35 degrees Fahrenheit

For Best Results

Allow to dry one hour before next coat.

Varathane Premium Oil Woodstain Quart Dark Walnut

Premium Wood Stains

Varathane® Premium Wood Stain penetrates up to twice as deep as competitive brands to reveal the beauty of natural wood grain. Apply to wood for long-lasting, translucent stain. Uses exclusive soya-oil base and anti-settling formula for better grain enhancement with less stirring during application. Please read product labels for additional directions and precautions before using

Garage Floor Coating

Brighten your garage with a clean, glossy, showroom-quality floor that is 5 times stronger than 1-part epoxy. Rust-Oleum® EPOXYSHIELD® Garage Floor Coating Kit applies in one easy coat and protects against gasoline, antifreeze, motor oil, salt, hot tire pick-up and cracking—for years to come.

5X stronger than 1-part epoxy
Walk on in 1-2 days and drive on in 3 days
Glossy finish
Durable protection with no peel promise
Indoor use only
Low odor and VOC
No hot tire pick-up
Burst pouch technology allows for easy mixing and application
2-Part Epoxy Burst Pouch
Decorative Color Chips
Concrete Etch
Instructions

Kit Contents

2 Part Epoxy Burst Pouch
Decorative Color Chips
Instruction Sheet
Concrete Etch

For Best Results

Top coat with Premium Clear Coating for ultra protection and a high-gloss finish.

Cabinet Transformations White Tint Base Kit

Rust-Oleum Cabinet Transformations White Tint Kit is a revolutionary do-it-yourself kitchen cabinet paint coating system that completely changes the dated or worn look of your cabinets for a fraction of the cost of purchasing new ones. Create the look of hand-crafted cabinetry in your kitchen or bathroom without the downtime or mess associated with cabinet replacement. Easy-to-use cabinet paint requires no stripping, sanding or priming. White tint base provides 14 color choices for a custom look.

Perfect for kitchen cabinets, bathroom vanities and furniture
Ideal for use on wood, laminate, metal or melamine surfaces
Each kit covers up to 100 sq. ft.
Provides a smooth soft shine with a rich satin finish in 3 easy steps
Offers superior stain and scratch resistance
Soap and water cleanup
Full use of cabinets and furniture after 24 hours
Includes 4 oz Krud Kutter Cleaner/Degreaser, Bond Coat and Top Coat
Bring your kit to the paint counter to tint to a light color of your choice or leave untinted for white cabinet paint

FOR BEST RESULTS

Properly measure your cabinetry prior to starting the project. If these measurements exceed the coverage on your kit package, you will need to purchase an additional kit.

Thoroughly inspect the cabinet surfaces for heavy grease or dirt. Pay special attention to areas around the stove, microwave and sink. Clean these extra dirty or greasy areas with soapy water and wipe clean prior to cleaning with the included Krud Kutter.

AVAILABLE SIZES

Kit - 100 Square Feet

Rust-Oleum HOME® Floor Deep Tint Base Base Coat

Rust-Oleum HOME^® Base Coat is Step 1 of 2 of this extremely durable interior Floor Coating system. This easy-to-use system can transform the look of any outdated floor without the cost of replacing it. The Base Coat brings a variety of color options you can choose from to refresh your space just by painting your floor. It can be used on tile, wood, laminate, concrete, vinyl, linoleum and more. Apply the Base Coat in your desired color and then apply the required Top Coat in one of two sheens.

Easy 2-step system
Superior adhesion to tough surfaces
Maximum scratch & stain resistance
Walk on in one day
No stripping, sanding or priming
Base coat and top coat are required

FOR BEST RESULTS

Simply clean the floor first with a cleaner degreaser and then apply the Base Coat. Apply the Top Coat 6 hours after application of the Base Coat.

AVAILABLE SIZES

1 Gallon
1 Quart

Truck Bed Coating

Rust-Oleum® Truck Bed Coating is the choice for recoating and restoring worn, unfinished or previously finished metal truck beds. When used with Rust-Oleum Truck Bed Applicator Kit (sold separately), this easy to apply polymer coating not only helps prevent truck bed damage caused by scratches, rust and weather, but it also enhances your vehicle's appearance.

Durable abrasion resistant
Textured finish that forms to the contours of a truck bed
Rust protection from Stops Rust formula
Pick your preferred DIY application from spraying and rolling to brushing
Multi-purpose coating for truck beds, fenders, step areas, trailer floors and more

The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.
• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon

V2100 System High Heat Spray

Add an attractive heat-resistant finish with Rust-Oleum High Performance V2100 System High Heat Coating Spray. This direct-to-metal formula provides the best-possible protection against corrosion and heat and delivers long-lasting durability.

Withstands temperatures up to 1000° F (537° C)
Tough, professional finish—superior resistance to chipping, cracking and peeling
High-output tip covers 50% faster, enamel dries 20% faster than other brands
Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC-compliant nationwide

For Best Results

For large projects, apply using the High Performance Comfort Grip

Protective Enamel Custom Spray 5-in-1

Rust-Oleum® Stops Rust® Protective Enamel with Custom Spray 5-in-1 lets you choose from five spray patterns with a twist of the dial. Use the high output spray for large curved surfaces, standard for a traditional experience, low output for details and corners without drips and runs, and vertical or horizontal fans for flat surfaces. Whether you’re painting wide spaces, tight corners or textured surfaces, Protective Enamel with Custom Spray 5-in-1 gives you ultimate control for superior results. When you're done, turn the dial to the lock position and store the remaining spray paint for your next project.

The advanced Stops Rust formula delivers 30% greater corrosion resistance and enhanced color retention compared to original matching Stops Rust colors with the standard spray paint tip. The durable, protective coating provides ultimate rust prevention for a long-lasting finish and excellent resistance to abrasion, fading, chipping and dulling. Apply this fast-drying paint on indoor and outdoor metal and wood projects for a long-lasting superior results.

Stops Rust® Protective Enamel with Custom Spray 5-in-1 features:

Intuitive spray patterns that give the ultimate control when painting
360° any-angle spray technology
A variety of spray paint colors in gloss, semi-gloss, satin and flat sheens
Fast dry times; dries to the touch in 2-4 hours, recoat within 1 hour or after 48 hours

Bulls Eye 1-2-3® Water-Base Primer

Rust-Oleum® Zinsser® Bulls Eye 1-2-3® Water-Base Primer is a wall primer and sealer that provides outstanding performance indoors and out. It features low odor, great flow and leveling, and a flexible, acrylic formula.

Usable on interior and exterior surfaces

Sticks to all surfaces without sanding

Seals stains, graffiti and tannin bleed

Provides a mold & mildew resistant barrier

Inhibits rust – great for new metal

Dries in 1 hour

Can be applied in temperatures as low as 35 degrees Fahrenheit

For Best Results

Allow to dry one hour before next coat.

Premium Wood Stains

Varathane® Premium Wood Stain penetrates up to twice as deep as competitive brands to reveal the beauty of natural wood grain. Apply to wood for long-lasting, translucent stain. Uses exclusive soya-oil base and anti-settling formula for better grain enhancement with less stirring during application. Please read product labels for additional directions and precautions before using

Garage Floor Coating

Brighten your garage with a clean, glossy, showroom-quality floor that is 5 times stronger than 1-part epoxy. Rust-Oleum® EPOXYSHIELD® Garage Floor Coating Kit applies in one easy coat and protects against gasoline, antifreeze, motor oil, salt, hot tire pick-up and cracking—for years to come.

5X stronger than 1-part epoxy
Walk on in 1-2 days and drive on in 3 days
Glossy finish
Durable protection with no peel promise
Indoor use only
Low odor and VOC
No hot tire pick-up
Burst pouch technology allows for easy mixing and application
2-Part Epoxy Burst Pouch
Decorative Color Chips
Concrete Etch
Instructions

Kit Contents

2 Part Epoxy Burst Pouch
Decorative Color Chips
Instruction Sheet
Concrete Etch

For Best Results

Top coat with Premium Clear Coating for ultra protection and a high-gloss finish.

Cabinet Transformations White Tint Base Kit

Rust-Oleum Cabinet Transformations White Tint Kit is a revolutionary do-it-yourself kitchen cabinet paint coating system that completely changes the dated or worn look of your cabinets for a fraction of the cost of purchasing new ones. Create the look of hand-crafted cabinetry in your kitchen or bathroom without the downtime or mess associated with cabinet replacement. Easy-to-use cabinet paint requires no stripping, sanding or priming. White tint base provides 14 color choices for a custom look.

Perfect for kitchen cabinets, bathroom vanities and furniture
Ideal for use on wood, laminate, metal or melamine surfaces
Each kit covers up to 100 sq. ft.
Provides a smooth soft shine with a rich satin finish in 3 easy steps
Offers superior stain and scratch resistance
Soap and water cleanup
Full use of cabinets and furniture after 24 hours
Includes 4 oz Krud Kutter Cleaner/Degreaser, Bond Coat and Top Coat
Bring your kit to the paint counter to tint to a light color of your choice or leave untinted for white cabinet paint

FOR BEST RESULTS

Properly measure your cabinetry prior to starting the project. If these measurements exceed the coverage on your kit package, you will need to purchase an additional kit.

Thoroughly inspect the cabinet surfaces for heavy grease or dirt. Pay special attention to areas around the stove, microwave and sink. Clean these extra dirty or greasy areas with soapy water and wipe clean prior to cleaning with the included Krud Kutter.

AVAILABLE SIZES

Kit - 100 Square Feet

Rust-Oleum HOME® Floor Deep Tint Base Base Coat

Rust-Oleum HOME^® Base Coat is Step 1 of 2 of this extremely durable interior Floor Coating system. This easy-to-use system can transform the look of any outdated floor without the cost of replacing it. The Base Coat brings a variety of color options you can choose from to refresh your space just by painting your floor. It can be used on tile, wood, laminate, concrete, vinyl, linoleum and more. Apply the Base Coat in your desired color and then apply the required Top Coat in one of two sheens.

Easy 2-step system
Superior adhesion to tough surfaces
Maximum scratch & stain resistance
Walk on in one day
No stripping, sanding or priming
Base coat and top coat are required

FOR BEST RESULTS

Simply clean the floor first with a cleaner degreaser and then apply the Base Coat. Apply the Top Coat 6 hours after application of the Base Coat.

AVAILABLE SIZES

1 Gallon
1 Quart

Truck Bed Coating

Rust-Oleum® Truck Bed Coating is the choice for recoating and restoring worn, unfinished or previously finished metal truck beds. When used with Rust-Oleum Truck Bed Applicator Kit (sold separately), this easy to apply polymer coating not only helps prevent truck bed damage caused by scratches, rust and weather, but it also enhances your vehicle's appearance.

Durable abrasion resistant
Textured finish that forms to the contours of a truck bed
Rust protection from Stops Rust formula
Pick your preferred DIY application from spraying and rolling to brushing
Multi-purpose coating for truck beds, fenders, step areas, trailer floors and more

The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.
• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon

V2100 System High Heat Spray

Add an attractive heat-resistant finish with Rust-Oleum High Performance V2100 System High Heat Coating Spray. This direct-to-metal formula provides the best-possible protection against corrosion and heat and delivers long-lasting durability.

Withstands temperatures up to 1000° F (537° C)
Tough, professional finish—superior resistance to chipping, cracking and peeling
High-output tip covers 50% faster, enamel dries 20% faster than other brands
Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC-compliant nationwide

For Best Results