Personalize your pet’s space with a fun customized message on a DIY chalkboard sign!

1. Follow the instructions on the spray paint can. Shake to mix for one minute after mixing ball begins to rattle. Holding the can 10-12” from the surface, apply the Chalkboard Spray Paint in a  steady, back-and-forth motion, slightly overlapping each stroke until covered. Apply 2 or more light coats a few minutes apart. 
2. Recoat within 1 hour or after 24 hours. Allow final coat of paint to dry for 24 hours.
3. Once Chalkboard Paint is fully dry, condition the surface by rubbing the side of a piece of chalk over entire area and erase to prepare the surface for writing. 
4. Display your new sign!