Industrial Coatings & Roof Repair Products

Rust-Oleum Concrete Saver 6700 Extended Pot Life Epoxy Floor Coating Clear

6700 100% Solids Decorative Epoxy

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

User friendly – Easy to mix two component system with a 60 minute pot life
High gloss, chemical and abrasion resistant finish
Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
No primer required over properly prepared concrete
VOC compliant nationwide
2A:1B mix ratio

Available Sizes

3 Gallon Kit Custom
15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

6700 3 Gallon Kit Custom
6700 15 Gallon Kit Custom
6700 15 Gallon Kit Armor Gray
6700 15 Gallon Kit Light Gray
6700 15 Gallon Kit Dunes Tan
6700 15 Gallon Kit Clear

Roof Walkway Matting

Elevate your walking surface 9/16", evenly distributing weight across thermo-welded PVC ribbing. Specifically designed as a safe walkway for flat roofs in all environments and even extreme weather conditions. Compatible with all roofing membranes and withstands wind gusts up to 60 mph. The “loose lay" design makes installation quick and easy with no permanent attachments required.

Available Colors

Gray

Black

Yellow for added visibility and safety

Available Sizes

2’ x 33’
3’ x 33’
4’ x 33’

B-I-N Primer With Turbo Spray System

Zinsser® combines the power of BIN® shellac-base primer with the speed and convenience of the Turbo Spray System® to provide the perfect aerosol solution for priming medium to large sized projects fast. Zinsser BIN with Turbo Spray System is great for blocking stains and odors from water, smoke and fire and is perfect for disaster restoration jobs.

The speed and quality of professional spray systems without the hassle
4x greater output than traditional spray primers
10" wide spray pattern for fast coverage
26 oz. can optimized for large projects
Great Wood Sealer
Dries in 15 minutes

For Best Results

Hold can upright 8-14" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke.

Available Sizes

26 oz. Spray

Cover-Stain® Oil-Base Primer

Get ultimate hiding power indoors and out with Rust-Oleum® Zinsser® Cover-Stain® Oil-Base Primer. This whole-house primer-sealer is a favorite with professionals. Use it to block stains, hide dark colors, prevent tannin bleed and penetrate and seal exterior wood.

Interior and exterior
Best exterior wood sealer
Blocks cedar & redwood bleed
Seals water, smoke & nicotine stains
Sticks to all surfaces without sanding
Dries in 1 hour

For Best Results

Spot-prime heavy stains with the aerosol spray.

Available Sizes

1 Gallon
5 Gallon
Quart
13 oz. Spray
16 oz. Spray

Fiberglass Reinforced Plastic Anti-Slip Step Covers

Preformed anti-slip step covers immediately creates a durable, safe and slip resistant surface. SafeStep is available in medium and extra coarse grit as well as a variety of sizes. Ideally suited for stairs, landings, platforms, ramps and wash down areas.

Excellent slip-resistance, even when wet
Extremely durable and can withstand vehicle traffic
Easy glue and screw installation
Interior and exterior use

Available Sizes

32" x 10"
36" x 10"
48" x 10"
59" x 10"
32" x 13 1/2"
36" x 13 1/2"
48" x 13 1/2"
59" x 13 1/2"
47 1/4" x 47 1/4"

ROCEpoxy Direct-to-Metal Epoxy Mastic 9100

ROCEpoxy® Direct-to-Metal Epoxy Mastic 9100 is a two-component, high solids epoxy coating that provides a durable, abrasion and chemical resistant protective surface suitable for most all industrial environments. As Rust-Oleum’s most versatile industrial product, it can be applied directly to sound rusted steel, galvanized metal, clean steel, concrete, and even slightly damp surfaces. This product was developed with the end user in mind. It has a convenient 1:1 mix ratio, a pot life of a minimum of two hours, and has multiple activator options, including: Fast Cure, Low Temp, Immersion, Satin Finish as well as the Standard activator. Can also be used as a primer under Rust-Oleum ROCThane high performance topcoats. ROCEpoxy Direct-to-Metal Epoxy Mastic 9100 is available in two VOC levels, 340 VOC and 250 VOC, depending on the activator you choose.

Extremely Versatile, Easy to Use, Durable, Solvent-Based Epoxy
Direct-to-Metal and Self-Priming on a Variety of Substrates
Ultra-Smooth Finish with High Build Capability on Edges and Welds
Superior Resistance to Solvents, Chemical, Abrasion and Impact
Five Year Rust-Proof Guarantee*

Available Sizes

One Gallon
Five Gallon

The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.

Ultra-smooth finish
Highly washable
Great adhesion on multiple surfaces
Low-odor, water-based formula
For interior and exterior use
VOC compliant nationwide

Where To Use The Mule

Interior and exterior walls, doors, trim and floors
Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall
Previously painted surfaces
Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

1 Gallon
5 Gallon

Premium 880 Elastomeric Roof Coating

Rust-Oleum® Premium 880 Elastomeric Roof Coating is a single component, rust preventative, water-based acrylic elastomeric roof coating.
This self priming, high build coating is designed for use on tightly adhered rusted surfaces or clean steel. It can also be used on metal, Modified Bitumen/Built-Up Roof (BUR) and Single-Ply roofing surfaces, and the excellent elongation properties of over 500% make it suitable for bridging small cracks. Premium 880 Elastomeric Roof Coating is suitable for over-coating previous coating systems that are in good sound condition.

Self Primes over tight rust
Over 500% Elongation
Excellent Corrosion protection
Bright White 88% reflectivity
Rain resistant in 3 hours
Rust preventative coating

For Best Results

Apply only when air and surface temperatures are between 46-130°F (8-55°C) and surface is at least 5°F (3°C) above dew point.

Available Sizes

4.75 Gallon
55 Gallon Drum - Made to Stock
250 Gallon Tote - Made to Order

6700 100% Solids Decorative Epoxy

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

User friendly – Easy to mix two component system with a 60 minute pot life
High gloss, chemical and abrasion resistant finish
Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
No primer required over properly prepared concrete
VOC compliant nationwide
2A:1B mix ratio

Available Sizes

3 Gallon Kit Custom
15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

6700 3 Gallon Kit Custom
6700 15 Gallon Kit Custom
6700 15 Gallon Kit Armor Gray
6700 15 Gallon Kit Light Gray
6700 15 Gallon Kit Dunes Tan
6700 15 Gallon Kit Clear

Roof Walkway Matting

Elevate your walking surface 9/16", evenly distributing weight across thermo-welded PVC ribbing. Specifically designed as a safe walkway for flat roofs in all environments and even extreme weather conditions. Compatible with all roofing membranes and withstands wind gusts up to 60 mph. The “loose lay" design makes installation quick and easy with no permanent attachments required.

Available Colors

Gray

Black

Yellow for added visibility and safety

Available Sizes

2’ x 33’
3’ x 33’
4’ x 33’

B-I-N Primer With Turbo Spray System

Zinsser® combines the power of BIN® shellac-base primer with the speed and convenience of the Turbo Spray System® to provide the perfect aerosol solution for priming medium to large sized projects fast. Zinsser BIN with Turbo Spray System is great for blocking stains and odors from water, smoke and fire and is perfect for disaster restoration jobs.

The speed and quality of professional spray systems without the hassle
4x greater output than traditional spray primers
10" wide spray pattern for fast coverage
26 oz. can optimized for large projects
Great Wood Sealer
Dries in 15 minutes

For Best Results

Hold can upright 8-14" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke.

Available Sizes

26 oz. Spray

Cover-Stain® Oil-Base Primer

Get ultimate hiding power indoors and out with Rust-Oleum® Zinsser® Cover-Stain® Oil-Base Primer. This whole-house primer-sealer is a favorite with professionals. Use it to block stains, hide dark colors, prevent tannin bleed and penetrate and seal exterior wood.

Interior and exterior
Best exterior wood sealer
Blocks cedar & redwood bleed
Seals water, smoke & nicotine stains
Sticks to all surfaces without sanding
Dries in 1 hour

For Best Results

Spot-prime heavy stains with the aerosol spray.

Available Sizes

1 Gallon
5 Gallon
Quart
13 oz. Spray
16 oz. Spray

Fiberglass Reinforced Plastic Anti-Slip Step Covers

Preformed anti-slip step covers immediately creates a durable, safe and slip resistant surface. SafeStep is available in medium and extra coarse grit as well as a variety of sizes. Ideally suited for stairs, landings, platforms, ramps and wash down areas.

Excellent slip-resistance, even when wet
Extremely durable and can withstand vehicle traffic
Easy glue and screw installation
Interior and exterior use

Available Sizes

32" x 10"
36" x 10"
48" x 10"
59" x 10"
32" x 13 1/2"
36" x 13 1/2"
48" x 13 1/2"
59" x 13 1/2"
47 1/4" x 47 1/4"

ROCEpoxy Direct-to-Metal Epoxy Mastic 9100

ROCEpoxy® Direct-to-Metal Epoxy Mastic 9100 is a two-component, high solids epoxy coating that provides a durable, abrasion and chemical resistant protective surface suitable for most all industrial environments. As Rust-Oleum’s most versatile industrial product, it can be applied directly to sound rusted steel, galvanized metal, clean steel, concrete, and even slightly damp surfaces. This product was developed with the end user in mind. It has a convenient 1:1 mix ratio, a pot life of a minimum of two hours, and has multiple activator options, including: Fast Cure, Low Temp, Immersion, Satin Finish as well as the Standard activator. Can also be used as a primer under Rust-Oleum ROCThane high performance topcoats. ROCEpoxy Direct-to-Metal Epoxy Mastic 9100 is available in two VOC levels, 340 VOC and 250 VOC, depending on the activator you choose.

Extremely Versatile, Easy to Use, Durable, Solvent-Based Epoxy
Direct-to-Metal and Self-Priming on a Variety of Substrates
Ultra-Smooth Finish with High Build Capability on Edges and Welds
Superior Resistance to Solvents, Chemical, Abrasion and Impact
Five Year Rust-Proof Guarantee*

Available Sizes

One Gallon
Five Gallon

The MULE (Modified Urethane Latex Epoxy)

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.

Ultra-smooth finish
Highly washable
Great adhesion on multiple surfaces
Low-odor, water-based formula
For interior and exterior use
VOC compliant nationwide

Where To Use The Mule

Interior and exterior walls, doors, trim and floors
Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall
Previously painted surfaces
Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

1 Gallon
5 Gallon

Premium 880 Elastomeric Roof Coating

Rust-Oleum® Premium 880 Elastomeric Roof Coating is a single component, rust preventative, water-based acrylic elastomeric roof coating.
This self priming, high build coating is designed for use on tightly adhered rusted surfaces or clean steel. It can also be used on metal, Modified Bitumen/Built-Up Roof (BUR) and Single-Ply roofing surfaces, and the excellent elongation properties of over 500% make it suitable for bridging small cracks. Premium 880 Elastomeric Roof Coating is suitable for over-coating previous coating systems that are in good sound condition.

Self Primes over tight rust
Over 500% Elongation
Excellent Corrosion protection
Bright White 88% reflectivity
Rain resistant in 3 hours
Rust preventative coating

For Best Results

Apply only when air and surface temperatures are between 46-130°F (8-55°C) and surface is at least 5°F (3°C) above dew point.

Available Sizes

4.75 Gallon
55 Gallon Drum - Made to Stock
250 Gallon Tote - Made to Order

6700 100% Solids Decorative Epoxy

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

User friendly – Easy to mix two component system with a 60 minute pot life
High gloss, chemical and abrasion resistant finish
Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
No primer required over properly prepared concrete
VOC compliant nationwide
2A:1B mix ratio

Available Sizes

3 Gallon Kit Custom
15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

6700 3 Gallon Kit Custom
6700 15 Gallon Kit Custom
6700 15 Gallon Kit Armor Gray
6700 15 Gallon Kit Light Gray
6700 15 Gallon Kit Dunes Tan
6700 15 Gallon Kit Clear

Roof Walkway Matting

Elevate your walking surface 9/16", evenly distributing weight across thermo-welded PVC ribbing. Specifically designed as a safe walkway for flat roofs in all environments and even extreme weather conditions. Compatible with all roofing membranes and withstands wind gusts up to 60 mph. The “loose lay" design makes installation quick and easy with no permanent attachments required.

Available Colors

Gray

Black

Yellow for added visibility and safety

Available Sizes

2’ x 33’
3’ x 33’
4’ x 33’

B-I-N Primer With Turbo Spray System

Zinsser® combines the power of BIN® shellac-base primer with the speed and convenience of the Turbo Spray System® to provide the perfect aerosol solution for priming medium to large sized projects fast. Zinsser BIN with Turbo Spray System is great for blocking stains and odors from water, smoke and fire and is perfect for disaster restoration jobs.

The speed and quality of professional spray systems without the hassle
4x greater output than traditional spray primers
10" wide spray pattern for fast coverage
26 oz. can optimized for large projects
Great Wood Sealer
Dries in 15 minutes

For Best Results

Hold can upright 8-14" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke.

Available Sizes

26 oz. Spray

Cover-Stain® Oil-Base Primer

Get ultimate hiding power indoors and out with Rust-Oleum® Zinsser® Cover-Stain® Oil-Base Primer. This whole-house primer-sealer is a favorite with professionals. Use it to block stains, hide dark colors, prevent tannin bleed and penetrate and seal exterior wood.

Interior and exterior
Best exterior wood sealer
Blocks cedar & redwood bleed
Seals water, smoke & nicotine stains
Sticks to all surfaces without sanding
Dries in 1 hour

For Best Results

Spot-prime heavy stains with the aerosol spray.

Available Sizes

1 Gallon
5 Gallon
Quart
13 oz. Spray
16 oz. Spray

Fiberglass Reinforced Plastic Anti-Slip Step Covers

Preformed anti-slip step covers immediately creates a durable, safe and slip resistant surface. SafeStep is available in medium and extra coarse grit as well as a variety of sizes. Ideally suited for stairs, landings, platforms, ramps and wash down areas.

Excellent slip-resistance, even when wet
Extremely durable and can withstand vehicle traffic
Easy glue and screw installation
Interior and exterior use

Available Sizes

32" x 10"
36" x 10"
48" x 10"
59" x 10"
32" x 13 1/2"
36" x 13 1/2"
48" x 13 1/2"
59" x 13 1/2"
47 1/4" x 47 1/4"

Professional Solutions

Products that work as hard as you do.

Professional Solutions

Products that work as hard as you do.

Explore Solutions

Floor Coatings & Repair

Locating & Marking

Metal & Corrosion Protection

Architectural Primers & Coatings

Safety Solutions

Roofing Solutions

Industrial Cleaning & Restoration Solutions

Architect & Engineering Resources

Concrete Repair

Commercial Abrasives

Safety & Technical Data Sheet Search (SDS/TDS)

Search by SKU, UPC or Product Name

Success Stories

Water Tank Coating Proves Durable and Beautiful

Noxyde® the Solution for Exposed Steel Girders

Manufacturing shop floor coated in 48 hours

Our Brands

Upcoming Training & Events

WWA'S Waterpark Association Annual Symposium & Trade Show®

American Institute of Architects Conferences and Expos

Lunch & Learn Programs

Featured Products

Cover-Stain® Oil-Base Primer

Fiberglass Reinforced Plastic Anti-Slip Step Covers

ROCEpoxy Direct-to-Metal Epoxy Mastic 9100

The MULE (Modified Urethane Latex Epoxy)

Premium 880 Elastomeric Roof Coating

Cleaners

Primers

Automotive

Paints, Stains & Sealers

Locate a Rust-Oleum Retailer