This DIY shamrock door hanger makes it easy to show off your St. Patrick’s Day spirit! Here’s how to make it in a few steps:

1. PREPARE: Setup your workspace in a well-ventilated area and place a drop cloth down to protect from overspray.
2. GLITTER: Shake your can of Rust-Oleum Glitter spray paint in Gold for about one minute after the mixing ball starts to rattle. Then, hold the can 12-14” away from the shamrock and spray in a steady, sweeping motion. Apply multiple light coats to the shamrock a few minutes apart until it’s completely covered. Then, let the Glitter spray paint dry for 20 minutes.
3. SEAL: Next, use the same technique you used with the Glitter spray paint to apply a few light coats of Rust-Oleum Glitter Clear Sealer as a topcoat on the shamrock.
4. PAINT: Now, it’s time to paint your letter. Shake your can of Rust-Oleum Painter’s Touch 2X Ultra Cover spray paint in Gloss Meadow Green for one minute after the mixing ball begins to rattle. Then, hold the can 10-16” away from the letter and spray a few light, even coats a few minutes apart until the letter is completely covered.
5. FINISH: Let your letter and shamrock dry completely for 24 hours. Then, attach the letter to the center of the shamrock with a glue gun. Use your hole punch to create two holes in the top of the shamrock, and string decorative ribbon through. Hang your shamrock on the front door and enjoy!